Last week, a customer asked, “How will i remove a refrigerator light bulb that's stuck in the socket?”
Here’s what’s helped us:
- Unplug or disconnect power to the refrigerator.
- Lightly spray a lubricant such as WD-40(R) at the lower bulb.
- Allow it to set for a few minutes and reach crevices.
- Use a damp rag or leather glove and gently twist the bulb counter clockwise to remove it.
- Place a new light bulb within the socket and turn clockwise gently. Try not to damage the threading.
- Restore power to the refrigerator.
Enter your refrigerator model no . on our website to discover the light bulb recommended for your model.
How to get rid of a broken refrigerator light bulb that's stuck in the socket:
- Make sure the refrigerator is unplugged.
- Place a shoe box beneath the socket to catch any falling pieces.
- Wear safety gloves.
- Use pliers to carefully turn the bulb base counterclockwise to remove it.
- With care, place a new light bulb in the socket.
- Restore capacity to the refrigerator.
Potatoes make a better side dish than the usual tool
One half of a raw potato is really a DIY favorite for removing a broken light bulb from a socket. Be aware that this may introduce damaging moisture to the socket. That's why it's best to first try our recommendation above.
Other common, related questions
Why do light bulbs get stuck?
Corrosion and expansion because of the cold air.
Can I place a “regular” light bulb in my fridge?
Light bulb replacement should follow the refrigerator manufacturer's guidelines listed in its owner's manual. You should only use the light bulb with the exact wattage recommended by the manufacturer.
It's a smart idea to purchase a few spare bulbs at any given time to avoid the annoying, ultra-dark refrigerator interior situation.
What basically get cleaning spray on my small light bulb?
Many refrigerators possess a light bulb cover to protect the light bulb from damage. It's best to avoid spraying cleaning solution close to the light bulb. When thoroughly cleaning the refrigerator interior with cleaning spray, you should unplug it first.
Anything else meet your needs? Let us know in the comments below. Thank you!
